Optopak 2

The Alice Optopak 2 allows the isolated switching of mains equipment such as "MicLive", "On-Air" lights, etc. from either low-voltage or closing-contact inputs. Switching occurs at the zero voltage point of the mains cycle to prevent generation of electrical noise. Two inputs are via Neutrik XLR.

Rack mountable with the RPK-1 adaptor.

Download PDF File

	Technical Specification
Control Input Pin1 =Commond GND Pin 2 = +5 to 30v DC (I/P Active High) Pin 3 = 0 to 200 ohms (I/P Active Low           Mains voltage specification: 230v AC 3VA (115v available to order) Dimensions (mm): 274 (w) x 113 (d) x 44 (h)