Matchpak 1 & 2

The Matchpak 1 is a bi-directional stereo unit for interfacing unbalanced semi-pro equipment to professional balanced line-levels. Fitted with four XLRs for balanced and four RCA sockets for unbalanced connections allowing ideal signal conversion for use with domestic recording equipment. Mains input is via an IEC connector and multi-turn gain presets are provided, accessible through the front panel.

Supplied set for a nominal 14dB attenuation line to equipment and a nominal 14dB gain equipment to line. Rack mountable with the RPK-1 adaptor.

Also available is the Matchpak 2, a dual unit allowing two recorders to be interfaced. Please note that the Matchpak 2 is not compatible with the RPK-1 rack adaptor.

Download PDF File

	Technical Specification
Balanced input to Unbalanced output Inputs impedance: >20k ohms balanced Frequency response: 20Hz - 20kHz +0/-0.1dB Common mode rejection: >60dB Noise: <-100db (ref +8dBu input) Distortion (THD): 0.005% Max input level: +26dBu Gain Range: -26 to +6dB Output impedance: less than 2k ohms Unbalanced input to Balanced output Inputs impedance: 22k ohms Frequency response: 20Hz - 20kHz +0/-0.1dB Noise: <-94db ( ref +8dBu input) Distortion (THD): 0.005% Clipping level: +26dBu into 5k ohms +21dBu into 600 ohms Gain Range: +6 to +26dB Output impedance: less than 1 ohm Mains voltage specification: 230v AC 50Hz 3VA (6VA on Matchpak 2) 115v available to order Dimensions (mm): 275(w) x 113(d) x 44(h) Weight (boxed): 1.10kg