|
 DA-PAK
The Alice DA-PAK is a stereo input to 4 stereo outputs distribution
amplifier primarily intended as a mixer output splitter for feeding several
programme or record feeds from a single stereo output. The unit is housed
in a convenient case designed to be free-standing or to be easily mounted
into woodwork,etc.
Performance is equivalent to Alice's rack-mounting distribution
amplifiers but the unit has its gain fixed to unity. Inputs are balanced
and bridging, outputs are balanced but may be individually wired unbalanced
if required.
Audio connectors are Neutrik XLR type. Mains input is via
an IEC connector. Rack mountable using the RPK-1 Adaptor.
Download
PDF File
|
|
| Inputs
impedance: |
20k ohms
balanced |
| Frequency
response: |
20Hz
- 20kHz +0dB/-0.1dB |
| Common
mode rejection: |
>60dB
typical |
| Noise: |
-100db
(RMS 30Hz - 15kHz ref + 8dBu output) |
| Distortion
(THD): |
<0.006%
(1kHz +8dBu input) |
| Max input
level: |
+28dBu |
| Gain: |
Fixed
at unity ±0.05db |
| Output
impedance: |
<1
ohm balanced and floating |
| Max output
level: |
+26dBu
into 5K ohms
+23dBu into 600 ohms |
| Phase
shift (600ohm load): |
<1°(20Hz)
<5°(20Hz) |
| Mains
voltage specification: |
230v
AC 50Hz 10VA (115v available to order) |
| Dimensions
(mm): |
379(w)
x 134(d) x 44(h) |
| Weight
(boxed): |
1.50kg |
| Rack-Panel:
RPK1 |
(0dBu
= 0.775 volts RMS) |
|
|
|
